Made in Italy
All of our woven types of wire mesh are produced according to ISO 4783/3
We offer 6 Woven types of Wire Mesh:
– Type A: Woven net
– Type B: Crimped – Single Intermediate Crimp
– Type C: Crimped – Double Intermediate Crimp
– Type D: Flat stamped – Lock crimped
– Type E: Flat stamped – Flat top crimped
– Type F: Welded – Pressure welded
Prospekt Drahtgewebe 5,41 MB (48 Seiten)
Produkte
Produkte
Drahtgitter Drahtgewebe
Das Gitter wird mit gleichmäßigen Abständen ohne zusätzliches Verpressen hergestellt. Die Produktgruppe enthält ein breites Spektrum verschiedener Maschen- und Webarten. Ebenso können die Drahtdurchmesser bei Schuss- und Kettfäden unterschiedlich ausgeführt werden. Drahtgitter können in zahlreichen Varianten bis zu einer Breite von 3 Metern in Rollen oder Zuschnitten ab 15mm Breite hergestellt werden.
| Öffnung | Drahtdurchmesser | Offene Fläche | Theoretisches Gewicht Edelstahl | Drahtgitter Drahtgewebe |
|---|---|---|---|---|
| [mm] | [mm] | [%] | [kg/mq] | |
| 8×8 | 2×2 | 64 | 5 | |
| 8×8 | 1,5×1,5 | 71 | 3 | |
| 6×6 | 2×2 | 56 | 6.3 | |
| 6×6 | 1,5×1,5 | 64 | 3.8 | |
| 5×5 | 2×2 | 51 | 7.1 | |
| 5×5 | 1,5×1,5 | 59 | 4.3 | |
| 4×4 | 2×2 | 44 | 8.3 | |
| 4×4 | 1,5×1,5 | 53 | 5.1 | |
| 3×3 | 2×2 | 36 | 10 | |
| 3×3 | 1,5×1,5 | 44 | 6.3 | |
| 3×3 | 1,2×1,2 | 51 | 4.3 | |
| 2,5×2,5 | 1,5×1,5 | 39 | 7 | |
| 2×2 | 1,5×1,5 | 33 | 8 | |
| 1,5×1,5 | 1×1 | 36 | 5 | |
| 1×1 | 1×1 | 25 | 6.3 |
Type B: Crimped Single Intermediate Crimp
They are produced by weaving drawn wires which are previously crimped through cogwheels giving precise bending on the wire. If each crimp corresponds to a wire interlace the mesh is known as plain weave crimping. If the wires are interlaced every three, five, seven or more crimps, the mesh is known as intermediate crimp mesh. They can be manufactured with square or rectangular meshes depending on the distance between the wires and it is also possible to use wires with different crimps in warp and weft direction.
| Öffnung | Drahtdurchmesser | Offene Fläche | Theoretisches Gewicht Edelstahl | Type B: Crimped Single Intermediate Crimp |
|---|---|---|---|---|
| [mm] | [mm] | [%] | [kg/mq] | |
| 100 × 100 | 5 × 5 | 91 | 2.88 | |
| 80 × 80 | 5 × 5 | 89 | 4.67 | |
| 60 × 60 | 5 × 5 | 85 | 5.43 | |
| 50 × 50 | 5 × 5 | 83 | 6.49 | |
| 40 × 40 | 4 × 4 | 83 | 5.1 | |
| 30 × 30 | 3 × 3 | 83 | 3.97 | |
| 20 × 20 | 3 × 3 | 76 | 5.95 | |
| 20 × 20 | 2 × 2 | 83 | 2.62 | |
| 15 × 15 | 2 × 2 | 78 | 3.5 | |
| 10 × 10 | 2 × 2 | 69 | 5.2 | |
| 10 × 10 | 1,5 × 1,5 | 76 | 2.92 |
Type C: Crimped Double Intermediate Crimp
| Öffnung | Drahtdurchmesser | Offene Fläche | Theoretisches Gewicht Edelstahl | Type C: Crimped Double Intermediate Crimp |
|---|---|---|---|---|
| [mm] | [mm] | [%] | [kg/mq] | |
| 100 × 100 | 5 × 5 | 91 | 2.88 | |
| 80 × 80 | 5 × 5 | 89 | 4.67 | |
| 60 × 60 | 5 × 5 | 85 | 5.43 | |
| 50 × 50 | 5 × 5 | 83 | 6.49 | |
| 40 × 40 | 4 × 4 | 83 | 5.1 | |
| 30 × 30 | 3 × 3 | 83 | 3.97 | |
| 20 × 20 | 3 × 3 | 76 | 5.95 | |
| 20 × 20 | 2 × 2 | 83 | 2.62 | |
| 15 × 15 | 2 × 2 | 78 | 3.5 | |
| 10 × 10 | 2 × 2 | 69 | 5.2 | |
| 10 × 10 | 1,5 × 1,5 | 76 | 2.92 |
Type D: Flat stamped Lock crimped
Type E: Flat stamped Flat top crimped
Type F: Welded Pressure welded
Welded meshes are made from overlaid wires in warp and weft direction, joined by electro spot welding at every intersection. Normally produced in square meshes with large open areas, thin wires, and precise openings they can be supplied in rolls width 1000 mm from 25 to 50 mt and panels (on demand).
| Matière | Pitch [mm] | Anzahl Maschen | Drahtdurchmesser [mm] | Theoretisches Gewicht [kg/mq] | Type F: Welded Pressure welded |
|---|---|---|---|---|---|
| Stainless steel AISI 304 | 50 × 50 | 2 inch | 2 × 2 | 1 | |
| Stainless steel AISI 304 | 25,4 × 25,4 | 1 inch | 1,47 × 1,47 | 1.2 | |
| Stainless steel AISI 304 | 16 × 16 | 3/5 inch | 1 × 1 | 0.98 | |
| Stainless steel AISI 304 | 12,7 × 12,7 | 1/2 inch | 1,24 × 1,24 | 1.7 | |
| Stainless steel AISI 304 | 12,7 × 12,7 | 1/2 inch | 0,71 × 0,71 | 0.6 | |
| Stainless steel AISI 304 | 11 × 11 | 2/5 inch | 1 × 1 | 1.5 | |
| Stainless steel AISI 304 | 8,46 × 8,46 | 1/3 inch | 1 × 1 | 1.13 | |
| Stainless steel AISI 304 | 6,35 × 6,35 | 1/4 inch | 0,63 × 0,63 | 0.7 | |
| Galvanized | 50,8 × 50,8 | 2 inch | 2,05 × 2,05 | 1.09 | |
| Galvanized | 25,4 × 25,4 | 1 inch | 1,7 × 1,7 | 1.2 | |
| Galvanized | 19 × 19 | 3/4 inch | 1,4 × 1,4 | 1.5 | |
| Galvanized | 16 × 16 | cca. 3/5 inch | 1,2 × 1,2 | 1.18 | |
| Galvanized | 12,7 × 12,7 | 1/2 inch | 1 × 1 | 1.7 | |
| Galvanized | 10,6 × 10,6 | cca. 2/5 inch | 0,9 × 0,9 | 1.1 | |
| Galvanized | 8 × 8 | 1/3 inch | 0,8 × 0,8 | 0.12 | |
| Galvanized | 6,3 × 6,3 | 1/4 inch | 0,55 × 0,55 | 0.76 | |
| Galvanized | 5,3 × 5,3 | 1/5 inch | 0,7 × 0,7 | 0.4 |
Legende
L – Öffnung: Abstand der Drähte in mm
D – Drahtdurchmesser: Durchmesser vor dem Weben in mm